Made for: Model 100 | Model 200 | Model 400
Perforated Wave Low Tab Press Board for the stationary platen
Only 1 of multiple styles of press boards needed for complete juicer operation- depends on your model (see below)!
Our perforated wave press board with low side tabs is used ONLY on the stationary platen of larger freestanding cold press juice machines: Model 100, Model 200 (R2/R3 versions only), and Model 400.
Low Tab boards are used on the stationary platen ONLY. These boards are hung by notches under the side tabs that align with pins on the platen face.
Made with HDPE, these press boards are used on the interior of the platens and designed to reduce pressure during pressing. They are also made with a perforated wave design to channel juice during pressing into the juice collection system.
IMPORTANT: You will need the following for your machine to operate properly:
Model 100 (all versions): ONE (1) High Tab Press Board and ONE (1) Low Tab Press Board
Model 200R1: TWO (2) High Tab Press Boards and TWO (2) Solid Center Press Boards
Model 200R2/R3: TWO (2) High Tab Press Boards and TWO (2) Low Tab Press Boards
Model 400 (all versions): TWO (2) High Tab Press Boards and TWO (2) Low Tab Press Boards and TWO (2) Solid Center Double-Sided Wave Press Boards